MakbyModular multimodal biofabrication platform
DomoMakby
Combine interchangeable printheads, materials and build platforms to engineer hierarchical tissue architectures.
| Simultaneous printheads | Up to four; seven interchangeable head options |
|---|---|
| Pneumatic head | 3, 5 and 10 mL; maximum viscosity 200 Pa·s |
| Temperature-controlled extrusion head | 3, 5 and 10 mL; room temperature to 55 °C; maximum viscosity 200 Pa·s |
| Pellet head (FGF) | Synthetic polymers including PCL, PLA and PLGA |
| Photocuring head | 365 or 405 nm; adjustable intensity, duration and height |
| Filament head (FDM) | Thermoplastic and composite filaments |
| Melt electrowriting (MEW) | Listed resolution 2–50 μm; maximum viscosity 200 Pa·s |
| Solution electrospinning | Typical fiber diameters 50 nm–20 μm; room-temperature operation |
| Cooling/heating platform | 120 × 120 mm; 5–55 °C |
| High-performance heating platform | 120 × 120 mm; room temperature to 120 °C |
| Drum collector | 140 × 60 mm; 400–4,000 rpm |
| Calibration and control | Automatic printhead calibration; integrated touchscreen; STL and G-code upload and management |
| Optional environmental chamber | Room temperature to 55 °C; 30–75% humidity; optional humidity controller |
| Chamber conditions | The temperature chamber is not sterile and cannot be used inside a sterile hood. Temperature and humidity depend on external conditions. |
Technical catalogue
Specifications from the September 2026 tissue engineering catalogue, pages 6–8. Confirm the selected configuration, material compatibility and operating conditions with MAKBY.